shahriyar etaati سه شنبه 27 شهریور 1397 06:03 ب.ظ نظرات ()
آپلود عکس
مبدل نسل جدید و پرسرعت USB به سریال(TTL) برای رایانه هایی که دارای پورت COM نیستند.

با استفاده از این ماژول می توانید پروژه خود را به رابط USB مجهز کنید. در این ماژول از تراشه PL2303HX استفاده شده است.


Adopt imported controller PL2303HX,which can stabilize the flash with high speed
500mA self recovery fuse for protection
Two data transmission indicator can monitor data transfer status in real time
Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
so that the board won't burnt down by material short cut.
Electrostatic package,insures the board will not be damaged before use
Support WIN7 system


All kinds of satellites set-top box upgrade
Router,HDD,ADSL,broad band modem firmware upgrade or cracked upgrade
cellphone,XBOX360,GPS serial communication,vehicle inspection and test,DVD flash and so on
Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU and so on
Simple UART communication,commonly used UART debugging tools in supper terminal
USB signal transferred to TTL signal,may be used by electronic enthusiast